Previous
Next

Torque motors DRM..

$0.00
Tax included
  • Full torque
    is supplied by the torque motor even when the rotor is blocked.
  • No damage in case of blockage
    and no damage in case of rotating direction, because this is what the motor has been designed for.
  • Flexible use
    thanks to torque motors in three different rated torques. This is how we help you find the optimum drive for your application.
Out-of-Stock
0/5
Reference Sew-Torque motors DRM.. Category E4-Sew-Torque motors DRM..

Share

The DRM../DR2M.. is a high-pole motor that is designed for operation with rated torque at standstill. This makes it the optimum drive for all applications in which a stop position is reached after a short movement and has to be maintained safely. Torque motor is the usual designation for motors of this type.

At SEW-EURODRIVE you will find the right motor for various requirements and speeds together in one gear unit. This is because we offer every torque motor in three rated torques. Furthermore, the DRM../DR2M.. is also constantly thermally safe and protected when the rotor is blocked.

Our torque motors require a 3-phase mains supply. The electrical design allows the torque motors to be operated in duty cycle S1 with 100% cyclic duration factor when the rotor is blocked. This means that the torque motor constantly provides the full permissible torque.

However, should your application require a particularly high starting torque for only a short time, we would recommend duty cycle S3. In this duty cycle, the motor runs a cyclic duration factor of 15% and, in this way, reaches up to three/five times the rated torque. Ideal for press tools, for example.

It goes without saying that everything fits together for torque motors and you can use many additional features of the DR.. modular motor system.

Only half the solution without a gear unit? No problem at all, as geared torque motors are assembled from a modular system just like gearmotors. The torque motors develop less torque in comparison to DR... series AC motors of the same design due to thermal conditions, resulting in a greater range of possible combinations with our gear units.

Specifications
  • Motors of the DRM../DR2M.. series can also be temporarily operated under voltage by another drive after which they can continue running at their own force
  • Connection voltages and IP degrees of protection for our torque motors correspond to those of our DR.. AC motors
  • Three duty cycle are available
    • Duty cycle S1: 0.7 Nm to 3.6 Nm
    • Duty cycle S3/15%: 2.6 Nm to 17.3 Nm
    • Duty cycle S1 with forced cooling fan: 1.9 Nm to 8.7 Nm

DRM.. / torque motors 500 rpm / 400 V / 50 Hz

 S1S3/15% 
TypeMN
Nm
IN
A
MN
Nm
IN
A
Standard brake type
DRM71S 120.70.262.60.87BE05
DRM71M 120.90.3130.99BE05
DRM90M 121.30.516.21.76BE1
DRM100M 122.30.810.42.75BE2
DRM100L 122.60.8811.72.95BE2
DRM132S 122.91.5312.95.6BE5
DRM132M 123.62.0517.37.7BE5
 S1 with forced air cooling 
TypeMN
Nm
IN
A
Standard brake type
DRM71S 121.50.61BE05
DRM71M 122.70.85BE1
DRM90M 123.91.09BE1
DRM100M 1251.52BE2
DRM100L 1271.85BE2
DRM132S 127.23.2BE5
DRM132M 128.74.25BE5

DRM.. / torque motors 600 rpm / 380 V / 60 Hz also available as 460 V / 60 Hz

 S1S3/15% 
TypeMN
Nm
IN
A
MN
Nm
IN
A
Standard brake type
DRM71S 120.60.282.10.92BE05
DRM71M 120.70.3152.31.02BE05
DRM90M 121.10.585.41.97BE1
DRM100M 121.90.928.73.05BE2
DRM100L 122.10.99103.5BE2
DRM132S 122.51.7810.46.4BE5
DRM132M 122.72.312.28BE5
 S1 with forced air cooling 
TypeMN
Nm
IN
A
Standard brake type
DRM71S 121.50.65BE05
DRM71M 122.10.88BE1
DRM90M 123.21.22BE1
DRM100M 124.51.73BE2
DRM100L 125.92.1BE2
DRM132S 126.24BE5
DRM132M 127.14.9BE5

DR2M.. / torque motors 500 rpm / 400 V / 50 Hz

 S1S3/15% 
TypeMN
Nm
IN
A
MN
Nm
IN
A
Standard brake type
DR2M71S 120.70.252.40.92BE03
DR2M71M 120.90.292.70.98BE03
 S1 with forced air cooling 
TypeMN
Nm
IN
A
Standard brake type
DR2M71S 121.90.68BE05
DR2M71M 122.70.87BE1

DRM.. / torque motors 600 rpm / 380 V / 60 Hz also available as 460 V / 60 Hz

 S1S3/15% 
TypeMN
Nm
IN
A
MN
Nm
IN
A
Standard brake type
DR2M71S 120.60.221.80.7BE03
DR2M71M 120.70.262.20.85BE03
 S1 with forced air cooling 
TypeMN
Nm
IN
A
Standard brake type
DR2M71S 121.50.67BE05
DR2M71M 122.10.94BE1
AC motors of the DRM.. series
Size71, 80, 90, 100, 112, 132
Mounting positionS, M, L
Number of poles12
Output options
Output options/FI, /FF, /FT, /FL, /FG, /FM, /FE, /FY, /FC
Mechanical attachments
BrakesBE05, BE1, BE2, BE5, BE11
Manual brake releaseHF, HR
Temperature sensor / temperature detection
Thermal motor protection/TF, /TH
Temperature detection/KT, /PT
Encoder
Built-in encoder/EI7C, /EI76, /EI72, /EI71
Add-on encoder DR71-132/ES7S, /ES7R, /ES7C, /AS7W, /AS7Y, /EV7., /AV7., /XV.., /XH..
Mounting adapter/ES7A, /XV.A, /XH.A
Connection alternatives
Connection alternatives/IS, /ISU, /AS.., /AC.., /AM.., /AD.., /AK.., /AB.., /KCC, /KC1, /IV
Ventilation
Low noise fan guard/LN,
Fan guard/C, /LF
Fan/AL, /U, /OL
Forced cooling fan/V
Additional options
2nd shaft end/2W
Condensation drain hole/DH
  • All applications where blocking occurs or a maximum torque is allowed even in the opposite rotating direction such as
    • Press tools
    • Flaps
    • Switches
    • Rotary gate valves
    • Simple winding drives
Sew-Torque motors DRM..